A.M.P.I. Master-8 Manual de usuario descargar pdf (Pagina 3)

6. Set the delay of channel #2 to be 100 msec. -

Press keys: DELAY,2,100,ENTER,3,ENTER’ (Please check the new delay).

7. Set channel #3 to the train mode.

Press keys: ‘TRAIN,3,ENTER’.

Channel #3 is now in the TRAIN mode and is waiting for a trigger.

8. Trigger it manually by pressing key ‘3’ (see Section 9)

You then obtain the train of pulses.

9. PULSES PER TRAIN

Set the number of pulses per train of channel #3 to be ‘5’.

Press keys : ‘M,3,5,ENTER,0,ENTER’ (see Section 8).

Trigger Channel #3 manually again by pressing ‘3’.

10. Connect channel #1 to trigger #3.

Press keys: CONNECT,1,3,ENTER (see Section 9).

Channel #1 will now trigger both channels #2 & #3.

Note:

The ‘ ®’ sign on the panel above the ‘1.4’ digits. This arrow indicates the direction of the connection .

To demonstrate Master-8’s most powerful feature

Assume that you programmed all the 8 channels to run in a specific pattern (your present experiment)

and now you want to switch to a new pattern (PARADIGM) that also uses all the 8 channels. With

Master-8 you can do this very easily. But first you have to program the other paradigms.

1 - Introduction

file:///D|/users/benny/master8.htm (3 of 14) [07/04/2002 12:32:07]

1 2 3 4 5 6 7 8 ... 13 14

Sin comentarios

A.M.P.I. Master-8 Manual de usuario Pagina 3